Monthly Archives: March 2024

A New Set of Wheels

Boy that could mean so many things…a new boat — na.  A new dinghy — na.  A new car — na.  We literally mean a new set of wheels.  But why do we need wheels on a boat?  Well, we don’t “need” wheels but we got them for our dinghy.

Many cruisers use wheels to help them pull their dinghy onshore during a beach landing.  Our previous dinghy was soooo heavy. We could have used dinghy wheels for her but she was too heavy for the wheels.  Yes, the wheels have a weight restriction.

But, our new Highfield 360CL weighs in at 75 kilos, the outboard weighs 55 kilos and we carry about 15 kilos in fuel for a total of 145 kilos.  Just the right amount of weight for a set of new wheels.

Which Wheels to Buy?

There are lots of different types of wheels on the market and we really had to do our due diligence.  We made sure they would accommodate our dinghy’s make, model, and weight while still being able to work in hard and soft sand.  Beachmaster consistently came up as the top brand. 

Matt emailed them to make sure they would work and hold up with our set up and we received an affirmative reply.  We ordered the removable mount set with retractable wheels.  We wanted to be able to take them off if we were not planning on using them for a while.

Matt placed the order on Thursday.  On Friday we received a call from Beachmaster asking if we were a foreign flagged vessel and I said “yes.”  She then asked if the wheels were being installed onto our dinghy which would be leaving the country with us, I said “yes.”  And then she said, I will then send you a new invoice as the original invoice charged you for GST (tax) and you qualify for a GST (tax) free order.  

What?  Yes, that is absolutely true.  Normally, both Matt and I automatically request GST free so I assumed he did on this order.  But he forgot.  So, the company proactively realized this and reached out to us to credit us the GST!  Seriously an amazing company.

Drilling Holes Into Our New Dinghy

The package arrived on Monday (1 business day after placing the order).  Talk about service.   We measure multiple times, tape off the area, and measure again.  We then put them up with VHB double stick tape so we could raise and lower the wheels without hitting the rub rail.  Then we drilled the holes into the transom.

The top photo shows he wheels down and the bottom photo shows the wheels up.

It took two of us to drill the holes so no photos.  Once the bolt holes were drilled, Matt taped them off and filled them with 5200 so they would not leak.  Then we installed each side.

Here are the final photos.  The before (upper left), installed and up (top right), installed and down (bottom left).

Now all we need is a beach to try them out!

Our blog posts run 10-12 weeks behind actual live events.  This blog post occurred around mid-January 2024.  In our last post we spend a lot of time redoing our dinghy chaps which came unglued.

Chap my Hide! Dinghy Chaps Unglued

Our new dinghy, a Highfield 360CL, has had a few issues.  Most recently the velcro holding the dinghy chaps (which are the cover to protect the pontoons) stopped sticking to the dinghy.  

We had our dinghy chaps custom made by Kim at Masterpieces in Canvas about 8 months ago.  She did an amazing job and we have had over a dozen people compliment us on the well made covers!   It was not her fault that the velcro sticky back stopped sticking.

The Problem

Kim used the sticky glue on the back of the velcro to adhere the chaps to the dinghy. The male part of the velcro stuck to the chaps and the female part (soft) of the velcro stuck to the dinghy.  In theory this works and it did for a short while (8 months).  But as the dinghy gets hot and cold in the sun it expands and contracts.  This causes the glue on the velcro to loosen and come off.  So, not a good long term plan.

With our last dinghy, we had the velcro glued onto hypalon strips, then sewn together, then we used special glue to stick the hypalon strips to the hypalon dinghy.  We should have remembered to do that to these chaps, but it slipped our mind as we had so much other stuff going on.  Our new dinghy is made from PVC not hypalon unfortunately. 

Hindsight is 20-20 they say.

The Remedy

We had a lovely conversation with Tim at Northland Inflatables.  He was able to sell us PVC strips and special PVC contact glue.  In addition, he walked us through the best way to remove the glue from the dinghy, the application of the velcro to the PVC, and the glueing process of the PVC strips to the dinghy. He is a wealth of information!

Tim informed us that the PVC strips will be stronger if you cut them diagonally across the fabric (rather than with the grain of the fabric).  Good tip.

We were ready to start this project after purchasing our special 2-part PVC contact glue, special brush, and 18m of 30mm wide PVC strips!

Step 1A: The Prep

It seems like all I do is glue removal projects!   Removal of all of the graphic stickers and its 23 year old glue, scraping all of the glue, 5200 and silicone from the ceiling panels, 6 hatch frames and of their adhesive, and now the dinghy glue.  And the funny thing is that they are all different, using different glues, on different surfaces, and requiring different removal techniques.

We removed the outboard and hauled the 75kilo dinghy up using our spin halyard.  Placing the dinghy on our two bean bags allowed easier access to the glue areas on the outside (see photo below).

The dinghy has 23 pieces of velcro spanning over 18 meters.  Tim had suggested we make the strips 30mm wide even though our velcro was only 25mm. He thought it might make sewing easier.  But in retrospect we should have just got 25mm strips.  Now we have to accomodate for the extra 5mm.  What I decided to do was apply the velcro on the bottom of each strip and had the extra 5mm on the top.  The reason I did this was because several velcro strips aligned with a seam and we did not want the white PVC strips to show.

We created a sheet and labeled/numbered each piece of velcro so we know exactly where it goes when we put it back.

Step 1B: More Prep

We used a pencil to mark where each piece of velcro (the edges, start and end) and then we taped all around the velcro before removal.  Taping will help limit the spread of glue and MEK when you start the adhesive removal process.  

We were really good about marking the edges but we did not tape until afterwards.  So the problem was the MEK took off the pencil markings so we had to guess where some of the pieces went. And some of the MEK extended beyond the velcro area causing a very slight discoloration.  So, tape before removing your velcro.

Step 2: The Removal

I carefully remove each of the 23 strips of velcro, one at a time. I place them on the PVC strips lining them up on the edge and labeling each one so I know where they go when we have to put them back onto the dinghy.

Next I get to removing the tons of glue off the dinghy.

We cannot use anything sharp to remove the glue because we would risk puncturing the pontoon (very bad).  I tried a rubber square, a plastic paddle, and a cool tool Aaron from Norsand Boatyard had given me and none of them worked.

Finally Matt brought out a putty knife that he adapted for me.  He rounded the corners and dulled the blade.  Eventually, I was able to remove the adhesive while using a heat gun to warm up the glue and the modified putty knife.  This would get the large globs off.  Then I went back with MEK (really nasty stuff) and a non-absorbent rag to remove the difficult to see remnants of the glue.  If you use an absorbent rag you end up wasting a lot more MEK. But you have to wear very thick, high quality gloves as the MEK will eat your skin and nails!

After many hours we finally have a dinghy without residue…clean.  It is always amusing to me that I have such a hard time removing adhesives.  Why do you ask?  Well, I am removing it because it no longer sticks, so why is it hard to come off?  Why I ask you?

Note

Tim from Northland Inflatables told us to put the velcro on the dull side of the PVC strips.  The dull side is the side that has UV protection which does not stick as well as the clean shiny side with no UV protection. The trick is trying to determine the shiny side from the dull side while in the sun.  So, we stick the velcro to the dull side, then sew it on.  This leaves the shiny, clean side ready for the contact glue to stick to the dinghy.

Step 3: Sewing

I tried to use our trusty Baby Lock sewing machine to sew the velcro to the PVC strips.  However, the machine struggled with the PVC as it was slippery and wouldn’t move with the machine’s foot.  And it made the stitching on the back look funny.

Matt breaks out our new “to us” Sailrite Sewing machine.  I had not used this machine yet as it totally intimidated me!  But, you got to start somewhere.  The Sailrite has much better feet and it just sucked the strips right through!

I had 38 meters of sewing to do as I sewed all four sides of each of the 23 strips of velcro to the PVC – it will not move now!

Step 4: Glue PVC strips to Dinghy

We did a lot of research on what was the best glue to stick things to PVC and either Bostik 995 or PVC contact glue were stated to be the best.  We found a tiny bottle (50ml) of Bostik 995 at All Marine for over $100.  Well that won’t do as we need over 300ml.  So, we asked Tim what we should use and suggested this special contact PVC glue that he uses on all of his dinghy repairs.  He sold us 300ml for $25.  Sweet as!

We run MEK along the strips and the dinghy to ensure there is nothing that will prohibit a good stick.

Next, we tape off the dinghy where each strip goes.  This will protect the dinghy from getting excess glue on it and it will help us align the strips in the exact place since we won’t have the luxury to move them around once they make contact with each other.

Matt and I work together to adhere the PVC strips.  Tim gave us a “chip” brush that he cut down to almost a stub and then rounded the corners.  He said this will help us to use less contact glue.

First you apply the contact glue to the PVC strip and then to the corresponding area on the dinghy.  You let it set for 10-15 minutes.  Then you go back with a heat gun to warm both up and slowly and carefully apply the PVC strip to the dinghy.  I say “slowly and carefully” because once the PVC strip makes contact with the dinghy it aint movin.  

Then I follow behind with a dowel to press the PVC strip to the dinghy and ensure it is stuck on good.

We ended up having to get an additional canister of the special PVC contact glue to finish our project.  But we did use it for two other smaller projects.  In the end I think we probably used 350-400ml.  We were probably more generous with the glue than necessary.

Completion

As you can see we are doing our best to leave no room for errors and to ensure this is stuck on good.  After a week of work we are finally done and our beautiful chaps are now snug as a bug in a rug!  Let’s hope these last us many years.

Our blog posts run 10-12 weeks behind actual live events.  This blog post occured in early January 2024.  Don’t miss out on our luxurious experience at Wai Ariki Hotsprings and Spa – check out our last blog post.

Wai Ariki Hot Springs & Spa

 The Barkers (Matt, Diana, their kids, Matt’s parents, brother and his wife) take us on a long ride down to Roturoa to visit the very special

Prior to enjoying the facilities we are given a brief tour which starts with a beautiful prayer.

Step 1: Te Iringa Waterfall Showers

Each person passes through a series of soft waterfall streams that energise the body and open it to awareness and to the present before continuing on the cultural wellness journey.  Behind the wood screen are 4 streams that range in temperature.

Step 2:  Te Ahi Tupia Tongariro Fire and Ice Caves

In Maori wellbeing practice, it is understood that moving between extreme temperatures improves vigour and stamina.  So, this is a series of hot and cold experiences that invigorate the body and soul.

Sauna #1 is called Bio Sauna and it is bewteen 50-60 C with 40-60% humidity.  We try to stay in here for the full 15 minutes but decide to move on after 12.

We did a quick walk through the ice cold pool (top right) and then moved on to the salt sauna. This was beautiful and my favorite of the saunas.  It sat around 70-80 C with 10-20% humidity. 

Back through the ice cold pool and into the last sauna called the Hay Sauna which was 60-70 C and 10-20% humidity.  This one bothered all of us as the hay smell made us sneeze.

The next step was only for the bold and the brave.  You step into a room, pull on a chain and a bucket full of ice water flows down upon you.

Step 3: Te Taiwhanga Matua Geothermal Pools

There are five (5) geothermal pools in this area: herbal, hydrotherapy, mineral alkaline, and the cold plunge.  The pool temperatures range from 12-41C as you gently move from one to the other.  

The Geo Soal Pool was the largest and had a long ramp for easy access.  After the really hot pools this felt like bath water to me, but it was still very beautiful and restorative.

Insde the Hydrotherapy pool they have beautiful cascading waterfalls with jets in between and a set of 10 bubbling lounge beds to relax your muscles.

The Herbal Pool had little pods of floating herbs.  We found rosemary, citrus, and lemongrass. It was probably one of the prettiest spots.

Step 4: Te Pae Paru Geothermal Mud Lounge

This was fun.  You lather our body with geothermal mud to nourish the skin and connect with the land.  Once you are fully covered in mud you lay down on heated lounge chairs and let it dry before going on to Step 5.

Step 5: Kohu Wai Ariki Steam Room

Reclining on the heated lounges and stoens in this misty cave allows you to completely relax.

After a beautiful and relaxing experience at Wai Ariki Hot Springs and Spa we head back to the private and very comfortable van to Auckland.  It was so spectacular to spend time with the Barker family.   They are truly good peeps!

Our blogs run 10-12 weeks behind actual live events.  This blog post occurred at the end of December 2023.  Did you catch our wine tour at Wiaheke Island?